The first version of the WEBER-HYDRAULIK valve portfolio is now available in Automation Studio™!

(Güglingen, Germany) March 13th, 2023 Weber-Hydraulik

WEBER-HYDRAULIK GMBH is a leading specialist for tailor-made and functional hydraulic solutions and developing high-quality cylinders, manifolds, steering and suspension systems, valves and power units.

WEBER-HYDRAULIK and Famic Technologies Inc. are working together to implement WEBER-HYDRAULIK’s valves in Famic Technologies’ advanced system design and simulation software, Automation Studio™. This important collaboration allows users of the software to benefit from the official digital models of the components through the software’s Manufacturers’ Catalogues.

Automation Studio™ is a renowned system design and simulation software for hydraulics, pneumatics, electrical engineering and industrial automation, which allows to integrate WEBER-HYDRAULIK valves in your hydraulic systems’ simulation.

Announcing the release of ARGO-HYTOS catalogs in the simulated Automation Studio™ format

(Zug, Switzerland) March 13th, 2023 ARGO-HYTOS

After thoroughly testing the tool, ARGO-HYTOS chose Automation Studio™ as a support software for the designing of specific electro-hydraulic systems. The decisive factor for the decision was the simplicity with which technological simulation models can be configured without major compromises in accuracy.

More recently, a collaboration agreement was signed between ARGO-HYTOS and the creator of Automation Studio™, Famic Technologies Inc., for the creation of ARGO-HYTOS’ entire portfolio of components in the Automation Studio™ format.

Supported by the ARGO-HYTOS applications team in the Czech Republic, the validation of a first catalog of cartridge valves has just been completed. It is premiered to launch at the CONEXPO CON/AGG in March 2023 where ARGO-HYTOS and Famic Technologies will exhibit and present various new products to many customers – some of which the two companies have in common.

The catalog will allow the entire Automation Studio™ community to have access to cartridge valve components of ARGO-HYTOS. These components are already pre-configured with all possible options, which include simulation models according to the performances described in the specifications of each product as well as 3D representations of the valves. The addition of these makes this catalog compatible with the manifold block module, allowing users to design and simulate their manifold block projects.

HENGLI AMERICA is proud to offer its standard product catalogs for Automation Studio™!

(Chicago,USA) March 13th, 2023 Hengli

Hengli America and Famic Technologies Inc. are working together to offer the Hengli’s portfolio of components available directly in Automation Studio™, making the design and simulation of hydraulic system solutions easier than ever.

The catalogs will include different families of products, such as cartridge valves, industrial valves, pumps and motors. The Automation Studio™ software will replicate the operating performance of Hengli's products in various hydraulic circuits and systems, allowing engineers to alter and monitor engineering factors like flow, pressure drop, hydraulic power and other essential features. For the cartridge valves catalog, the process initially begins with the creation of the schematic using a wide range of hydraulic components from the manufacturer's catalog. Then, using the schematic to build a 3D manifold block with a variety of features, it will optimize the manifold by automatically generating channel connections to provide the designer with the best solutions. In terms of user experience, creating a manifold has become considerably more straightforward and efficient, thanks to a range of automated capabilities in the program.

 

Integrate Yuken’s hydraulic components in your circuit design and simulation using Automation Studio™

(Japan) August 1st, 2022 Norgren

Making Yuken's catalogues available in Automation Studio™ was deemed essential to allow our customers to integrate our hydraulic components in their circuit design and simulation. The current format of Yuken’s catalogues in Automation Studio™ allows to configure components according to the options available, confirm compatibility with other components available in the market, utilize 3D models, and refer to the specification data. Our DSG Series Solenoid Valves and A Series Piston Pumps have become iconic products over decades and are highly regarded by our customers. Our cooperation with Famic Technologies Inc. gives Yuken a great opportunity to develop reliable components with the latest information technology features available in the software.

Famic Technologies is proud to announce its sponsorship to NFPA Fluid Power Action Challenge 2022 hosted by Komatsu Mining Corp!

(Pennsylvania, USA) May 2th, 2022 NFPA Fluid Power Action Challenge

Famic Technologies Inc., creator of Automation Studio™, the renowned CAD and simulation software for hydraulics, pneumatics, electrical and automation, is proud to be a valued supplier of Komatsu. Thanks to this long-term relationship, Famic Technologies is happy to once again sponsor an NFPA Fluid Power Action Challenge hosted by Komatsu Mining Corp!

FEMA Corporation has teamed up with Famic Technologies Inc. to release its first hydraulic catalog integrated into the Automation Studio™ software.

(Michigan, USA) April 25th, 2022 FEMA

Reposted from FEMA Corp.

Automation Studio™ is a renowned system design and simulation software for hydraulics, pneumatics, electrical engineering, and industrial automation, which allows complete modeling of precise hydraulic circuits through its innovative system design. Licensed users will be able to confidently design system circuits utilizing FEMA Corporation’s catalog of electro-hydraulic solenoids by simply dragging and dropping the pre-configured component(s) into their hydraulic circuit(s) in the Automation Studio™ Editor.

Try it before you buy it: Even more SMC technologies now available in Automation Studio™

(Egelsbach, Germany) February 21st, 2022 SMC

SMC and Famic Technologies offer the convenient and efficient virtual assembly of pneumatic systems – now with more than 800 components available

Designing and planning pneumatic circuits has never been easier: SMC has extended its own product library for use with the design and simulation software Automation Studio™ from Famic Technologies Inc., by more than 60 percent. Now, pneumatic engineers and system integrators have the ability to use flagship solutions such as ISO interface solenoid valves in their digital designs.

SMC and Famic Technologies are working together to support planners and machinery builders with their combined knowledge in the areas of simulation and application. Users of Automation Studio™ can now create and simulate pneumatic circuits using more than 800 SMC components

Mitsubishi Electric Catalogue for Automation Studio™ is now available!

(Montreal, Quebec) June 1st, 2021 GRH

Famic Technologies Inc., creator of Automation Studio™, the renowned CAD and simulation software for hydraulics, pneumatics, electrical and automation, is proud to announce the availability of the Mitsubishi Electric Catalogue for Automation Studio™.

The Mitsubishi Electric Catalogue for Automation Studio™ offers an extensive set of data attributes for each component. It includes its PDF specifications sheet, 2D symbol IEC 60617 and NEMA ICS 19-2002 compliant, images, technical data, commercial information, 3D representation, simulation model(s), virtual test bench(es) and use cases showing that the component behaves according to the manufacturer’s specifications. Furthermore, a Product Configurator is also available, allowing the user to build the component’s part number as per Mitsubishi Electric’s type code information. Once the configuration process is completed, a valid part number with all of its corresponding product characteristics is generated.

Standard products from Wandfluh are now available in Automation Studio™

(Frutigen, Switzerland) March 30th, 2021 GRH

With this simulation software from the company Famic Technologies Inc., hydraulic and electrical circuits can be designed, simulated and documented consequently. In addition to schematics and parts lists, block manifold designs can also be created and transferred to CNC machining applications. Furthermore, the software allows functional tests and the search for errors already during the planning process.

Wandfluh is proud to be able to offer its standard products catalogue for Automation Studio™ on the market together with the licensing company Famic Technologies Inc.

Janatics India Private Limited and Famic Technologies Inc. are proud to announce their collaboration for the distribution of Automation Studio™ to educational institutions in India.

(Montreal, Canada) November 11th, 2020 janatics-logo

 

Famic Technologies Inc., a pioneer in design and simulation software for fluid technologies and industrial automation, continues its development of the Indian market by partnering with Janatics India for the distribution of Automation Studio™. As a privileged distributor, Janatics India will supply the Automation Studio™ software as part of its hardware offer for educational institutions.

Try it before you buy it: SMC technologies now available in Automation Studio™

(Egelsbach), November 2020 - https://www.smc.eusmc logo

 

THE GLOBAL MARKET LEADER FOR PNEUMATIC AUTOMATION TECHNOLOGY, SMC, ANNOUNCES THE RELEASE OF THEIR PRODUCTS CATALOGUE IN AUTOMATION STUDIO™.

SMC and Famic Technologies offer the convenient and efficient virtual assembly of pneumatic systems

Designing and planning pneumatic circuits has never been easier: SMC has made its own product library available for this purpose for use with the design and simulation software Automation StudioTM from Famic Technologies. The two companies are working together to support planners and machinery builders with their combined knowledge in the areas of simulation and application. Users of Automation StudioTM can now create and simulate pneumatic circuits using SMC components.

Hypower Catalogue for Automation Studio™

(Montreal, Quebec) July 9th, 2020 Hypower logo

Famic Technologies Inc. is proud to present the latest version of the Hypower Catalogue for Automation StudioTM! All digital products in this virtual catalogue are pre-configured with Hypower’s latest technical specifications and are compatible with the Hydraulic Workshop of Automation StudioTM 6.4. Users may now quickly get access to Hypower components for their systems integration and spend less time developing cylinder models.

Janatics Pneumatic Catalogue for Automation Studio™

(Montreal, Quebec) May 7th, 2020 
 

Famic Technologies Inc. is proud to announce the launch of the Janatics Pneumatic Catalogue for Automation StudioTM! All the digital products in this virtual catalogue are pre-configured with Janatics latest technical specifications and are compatible with the Pneumatic Workshop of Automation StudioTM 6.4. Users can now get quick access to Janatics components for their systems integration, which will save valuable time in developing component models.

Famic Technologies Releases Version 6.3 of its Machine Design and Simulation Software Automation Studio™

(Montreal, Quebec) May 24, 2018 - Originally published in OEM Off-Highway

Famic Technologies has released the latest version of Automation StudioTM, its machine design and simulation software. Version 6.3 of Automation StudioTM better supports users’ documentation needs by offering a new environment of its BOM & Report Module, and expands its co-simulation reach with third-party software, control devices and PLCs.

Famic Technologies and Nova Didacta sign an agreement for the distribution of the Automation Studio™ software in the southeastern region of Brazil

(Montreal, Quebec) April 7, 2018 
 

Famic Technologies Inc., a pioneer in design and simulation software for fluid technologies and industrial automation, continues its development of the Brazilian market by partnering with Nova Didacta for the distribution of Automation StudioTM in the southeastern region of Brazil. As a privileged distributor, Nova Didacta will promote Automation StudioTM to technical and higher education institutions that offer study programs in mechatronics and industrial automation.

Famic Technologies Inc. and ID System Didactic sign an agreement to distribute Automation Studio™ software in the southern part of France

(Montreal, Quebec) January 19th, 2018  
 

Famic Technologies Inc., a pioneer in design and simulation software for fluid technologies and industrial automation, continues its development of the French market by partnering with ID System Didactic for the distribution of Automation Studio™ in the southern part of France. As a preferred distributor, ID System Didactic will promote Automation Studio™ to educational institutions that offer mechatronic programs.

Achieve a Great Return on Investment with Andon Studio™

(Montreal, Canada) June 20, 2017 
 

Famic Technologies is the developer of Industry 4.0 software Andon StudioTM, a solution that has generated a lot of interest by several manufacturing companies and university researchers.

Automation Studio™ E6.2 Interactive Lab Exercises

(Montreal, Quebec) October 4, 2016 

Famic Technologies Inc. has developed libraries of interactive lab exercises with its design and simulation software Automation StudioTM Educational 6.2. These exercises are available for hydraulics, pneumatics and electrical technologies to test students’ knowledge retention level. 

Famic Technologies Releases Automation Studio™ 6.2 with New and Improved Functionalities

(Montreal, Quebec) May 2, 2016 

Famic Technologies Inc. announced today a comprehensive line of new features and high quality functionalities necessary for the simulation solution software industry for technologies including hydraulic, pneumatic, electrical and HMI. Automation StudioTM version 6.2 offers peerless potential as a design and simulation software for both the industry and educational institutions.

i-Design Integrated Manifold Design Tool

April 20, 2016 - Originally published in Mobile Hydraulic Tips 
 

HydraForce has released the latest version of i-Design, its circuit design tool. Version 5 of i-Design supports the trends toward integrated hydraulic systems, expanded use of electro-hydraulics, and greater global application of hydraulic manifolds and cartridge valves.

Our First Contest! Students use Automation Studio™ Software Solution in a National Competition

(Bogota, Colombia) September 10, 2015 
 

Famic Technologies Inc., the renowned developer of Automation StudioTM, the all-in-one software solution for system design and simulation, and its authorized distributor for Colombia, Casyber LTDA, launched the first 'National Competition for automation with integrated technologies' using Automation StudioTM in cooperation with Francisco José de Caldas University and the Canadian Embassy, on September 10, 2015 in Bogota, Colombia.

Zhejiang Yalong Educational Equipment Joint-Stock Co. Ltd partners with Famic Technologies Inc. to bring Automation Studio™ to several regions in China

(Montreal, Quebec) February 13th, 2015 
 

Famic Technologies Inc., creator of Automation StudioTM, has recently announced that they have found yet another business partner in the likes of Chinese educational equipment manufacturers, Zhejiang Yalong Educational Equipment Joint-stock Co. Ltd. "Yalong" headquartered at Wenzhou, China, has now become the authorized reseller of Automation StudioTM products in Southern China. This new partnership along with the partnership already in place with K&H in Northern China, allows Automation StudioTM promotion in the whole Chinese territory.

Famic Technologies Inc. Delivers the "New" Automation Studio™ With Improved Features & Enhanced Performance

(Montreal, Quebec) March 25th, 2014 
 

Famic Technologies Inc., today announced an array of new feature innovations and enhanced design and functionalities unmatched in the simulation solution software industry for teaching and training all project/machine technologies including hydraulics, pneumatics, electrical systems and HMI. Automation StudioTM, Version 6.1 offers the most complete design and simulation software in the industry today. 

Famic Technologies releases its latest Hydraulic Catalogue v4.0 for Automation Studio™

(Montreal, Quebec) October 24th, 2013 
 

Famic Technologies Inc., recognized the world over for Automation StudioTM, the renowned design and simulation software for fluid power, electrical and automation, announces the release of its latest hydraulic catalogue V4.0. This catalogue offers a superior list of components currently in-demand from its broader Automation StudioTM mobile and industrial hydraulic users' community for quick systems design, simulation and integration tasks in Automation StudioTM P6. 

Famic Technologies Showcases its CAD and Simulation Software at ISARC 2013 in Montreal

Famic Technologies Inc., is exhibiting at the 30th International Symposium on Automation and Robotics in Construction and Mining (ISARC 2013) in Montreal, August 11-13. Visit BOOTH #1023 for personalized demonstrations of Industrial IT Services, Automation StudioTM and Andon StudioTM.

Famic Technologies Inc., leader in software engineering and industrial automation, is proud to showcase its CAD and simulation software at ISARC 2013 (International Symposium on Automation and Robotics) in Montreal from August 11-13. Visit BOOTH #1023 for personalized demonstrations.

Famic Technologies Presents Automation Studio™ at the Offshore Technology Conference

Famic Technologies Inc. creator of Automation StudioTM, software engineering and industrial automation specialist, is presenting its latest all-in-one design and simulation software solution, Automation StudioTM, at the Offshore Technology Conference (OTC) from May 6th to 9th in Houston, Texas. Live and interactive presentations of Automation StudioTM will demonstrate how it improves efficiency and significantly reduces downtime for bottom line results in the Offshore & Marine and Oil & Gas industries.

Famic Technologies Inc. Expands Its Reach in South Korea, Signs Distributor Agreement with Software Provider, INROOT Corp.

(Montreal, Quebec) January 21th, 2013 

Famic Technologies Inc. creator of Automation StudioTM, the renowned computer-aided design (CAD) and simulation software solution for fluid power and electrical systems, announced today it has signed a distribution agreement with INROOT Corporation, a leading engineering software solution provider in South Korea. As an authorized distributor, INROOT will provide customer service and first level technical support throughout South Korea for Automation StudioTM P6 Professional Edition, Famic Technologies' flagship product.

Famic Technologies and Linde Hydraulics Collaborate to Produce Linde Pumps and Motors Catalogue for Automation Studio™ P6

(Montreal, Quebec) November 19th, 2012 

Famic Technologies Inc. creator of Automation StudioTM, the renowned design and simulation CAD software for fluid power, electrical and automation, is proud to announce its collaboration with Linde Hydraulics, a leading manufacturer of heavy-duty hydraulic drive technology, to release one of the most advanced manufacturer's catalogues available in Automation StudioTM P6.

Andon Studio™, a Powerful New Request Management Software Solution to Optimize Industrial Processes

(Montreal, Quebec) October 2nd, 2012 
 

Known for creating innovative engineering software solutions, Famic Technologies Inc. is pleased to introduce Andon StudioTM , a powerful new request management solution that optimizes industrial processes. Initially designed to support effective response procedures in the manufacturing industry, Andon Studio software easily adapts to all factory and plant operations. It facilitates the sending and monitoring of service requests using the latest advances in communication technology.

Famic Technologies Inc. Opens an Office in Germany

(Montreal, Quebec) June 4th, 2012 
 

Famic Technologies Inc. creator of the renowned Automation StudioTM design and simulation software for hydraulics, pneumatics, electrical and automation systems, is very pleased to announce the expansion of its operations with the opening of an office in Germany. The new office is located in Munich, ideally positioned to provide better support and sales in Europe, primarily in German speaking countries. 

Comatrol launches EasyValve™ 2.0, its hydraulic manifold design software, and a new valve catalogue for Automation Studio™, both developed by Famic Technologies Inc.

(Montreal, Quebec) March 22nd, 2011 
 

Comatrol of Easley, South Carolina, a member of the Sauer-Danfoss Group that engineers, manufactures and supplies screw-in cartridge valves and Hydraulic Integrated Circuits (HICs), announced today that it has collaborated with Famic Technologies to make two main products available: (1) the second version of its hydraulic manifold circuit design software, EasyValveTM, and (2) a first version of its valve catalogue for Automation StudioTM, an innovative design and simulation software developed by Famic Technologies Inc. of Montreal, Quebec.