Janatics Pneumatic Catalogue now part of Automation Studio™!

(Montreal, Quebec) May 7th, 2020 
 

Famic Technologies Inc. is proud to announce the launch of the Janatics Pneumatic Automation StudioTM Catalogue! All the digital products in this virtual catalogue are pre-configured with Janatics latest technical specifications and are compatible with the Pneumatic Workshop of Automation StudioTM 6.4. Users can now get quick access to Janatics components for their systems integration, which will save valuable time in developing component models.

Designing a New Artificial Lift Method Using Computational Simulation and Evolutionary Optimization

(Montreal, Canada) September 30, 2019 – Originally published in Mining Industry News IEEE Xplore

Oil exploitation has moved into deeper reservoirs with the advances in drilling techniques and thus the development of new pumping techniques has become a challenge to improve production. The positive displacement pumping system proposed in this paper is presented as an artificial lift technique. Here we present a new pumping device, its estimated operational curves through numerical simulations and a prototype of the device, denominated a Double Acting Submersible Linear Pump (SLP)…

Provide Students with the Right Knowledge and Skills towards their Future Career

(United Kingdom) August 30, 2018 
 

Suffolk One College

Suffolk One is an inclusive Sixth Form College located in Ipswich, Suffolk. The College offers range of Advance levels, BTEC Diploma courses, GCSE re-sits and courses in Foundation Learning. The College aims to “develop an inclusive and inspirational learning centre that sits in the heart of a collaborative learning community where all talents and achievements are equally valued."

Famic Technologies Releases Version 6.3 of its Machine Design and Simulation Software Automation Studio™

(Montreal, Quebec) May 24, 2018 - Originally published in OEM Off-Highway

Famic Technologies has released the latest version of Automation StudioTM, its machine design and simulation software. Version 6.3 of Automation StudioTM better supports users’ documentation needs by offering a new environment of its BOM & Report Module, and expands its co-simulation reach with third-party software, control devices and PLCs.

Famic Technologies and Nova Didacta sign an agreement for the distribution of the Automation Studio™ software in the southeastern region of Brazil

(Montreal, Québec) April 7, 2018 
 

Famic Technologies Inc., a pioneer in design and simulation software for fluid technologies and industrial automation, continues its development of the Brazilian market by partnering with Nova Didacta for the distribution of Automation StudioTM in the southeastern region of Brazil. As a privileged distributor, Nova Didacta will promote Automation StudioTM to technical and higher education institutions that offer study programs in mechatronics and industrial automation.

Famic Technologies Inc. et ID System Didactic signent un accord de distribution du logiciel Automation StudioTM sur la partie sud de la France

(Montreal, Québec) January 19, 2018 
 

Famic Technologies Inc., pionnier dans les logiciels de design et de simulation des technologies des fluides et d’automatisation industrielle, continue son développement du marché français en s’associant à ID System Didactic pour la distribution d’Automation StudioTM sur la partie sud de la France. En tant que distributeur privilégié, ID System Didactic fera la promotion d’Automation StudioTM auprès des institutions d’enseignement de la mécatronique.

Achieve a Great Return on Investment with Andon Studio™

(Montreal, Canada) June 20, 2017 
 

Famic Technologies is the developer of Industry 4.0 software Andon StudioTM, a solution that has generated a lot of interest by several manufacturing companies and university researchers.

Practical and Efficient Education of Students

(University of Osnabrück, Germany) June 5, 2017 
 

Background

Numerous companies renowned and specialized in agricultural engineering are headquartered in Osnabrück Land, as agriculture represents an important economic factor for the region. Correspondingly, there is a high demand for qualified junior staff.

At the Osnabrück University of Applied Sciences, – the largest and most performant university of applied sciences in Lower Saxony, – the education of junior staff in agricultural engineering represents an essential element of the program offered.

Achieving Great Synergy in Design, Testing and Training

(Iveco Magirus AG, Germany) February 24, 2017 
 

Background

CNH Industrial (CNHI) is a global leader in the capital goods sector that, through its various businesses, designs, produces and sells agricultural and construction equipment, trucks, commercial vehicles, buses and specialty vehicles, in addition to a broad portfolio of powertrain applications. Present in all major markets worldwide, CNH Industrial is focused on expanding its presence in high-growth markets, including through joint ventures.

Iveco represents a brand within CNH Industrial and its vehicles are used all over the world. Iveco designs, manufactures and sells a wide range of light, medium and heavy commercial vehicles for on and off-road use. Gathering over 150 years of experience from former brands’ heritage, Iveco has always been committed to excellence in the creation of safe, efficient and sustainable vehicles.

Excellent Support for Trainings

(Liebherr-Werk Nenzing GmbH, Austria) January 5, 2017 
 

Background

Liebherr represents one of the largest construction equipment manufacturer in the world. The Liebherr-Werk Nenzing GmbH in Austria produces cable excavators, crawler cranes, and heavy construction machines.

It has established itself as an innovation leader worldwide and is using the Automation StudioTM software provided by Famic Technologies Inc. to train customers and employees.

Automation Studio™ - From Engineering Your Systems to Effective Machine-Based Training

(Las Vegas, NV, USA) September 27, 2016 – Originally published in Mining Industry News 
 

With tough times persisting in the mining industry, manufacturers and OEMs need to bring effective changes in their work process in order to increase productivity and reduce unnecessary costs. To achieve this goal, Famic Technologies recommends the implementation of tools that will optimize all aspects of a product/project’s lifecycle: system design, simulation, documentation, training, troubleshooting, etc. 

Automation Studio™ E6.2 Interactive Lab Exercises

(Montreal, Quebec) October 4, 2016 

Famic Technologies Inc. has developed libraries of interactive lab exercises with its design and simulation software Automation StudioTM Educational 6.2. These exercises are available for hydraulics, pneumatics and electrical technologies to test students’ knowledge retention level. 

Great CAD and Animation Tool for Fluid Power and Mechatronics

(Alexandria, MN, USA) May 27, 2016 
 

Background

Alexandria Technical and Community College (ATCC) offers high quality technical programs that meet the economic and culture life style of Minnesota’s communities. This institution promotes a career-oriented education to help prepare their students meet industries’ expectations.

The Application of Eaton CLS Valves in Designing Unique Systems with Automation Studio™

(Houston, TX, USA) May 5, 2016 - Originally published in English in Offshore Industry News 
 

Famic Technologies Inc. continuously pushes the boundaries of innovation with its unique machine design and simulation software Automation StudioTM. Over the last two decades, it has delivered significant changes in design and simulation methodologies of multi-technology systems – hydraulic, mechanical, electrical and automation – by putting forward a complete ‘machine knowledge management’ concept, establishing the standard in technology convergence. 

Famic Technologies Releases Automation Studio™ 6.2 with New and Improved Functionalities

(Montreal, Quebec) May 2, 2016 

Famic Technologies Inc. announced today a comprehensive line of new features and high quality functionalities necessary for the simulation solution software industry for technologies including hydraulic, pneumatic, electrical and HMI. Automation StudioTM version 6.2 offers peerless potential as a design and simulation software for both the industry and educational institutions.

i-Design Integrated Manifold Design Tool

April 20, 2016 - Originally published in Mobile Hydraulic Tips 
 

HydraForce has released the latest version of i-Design, its circuit design tool. Version 5 of i-Design supports the trends toward integrated hydraulic systems, expanded use of electro-hydraulics, and greater global application of hydraulic manifolds and cartridge valves.

Keeping the Load Safely Hooked

(Munich, Germany ) April 4, 2016 - Originally published in German in Mobile Maschinen 
 

Simulating the winch control of a mobile gantry crane

Mobile gantry cranes are used to transport precast elements for wind turbines or bridges. For the design, a powerful software is needed. In this case, the control of the winch was simulated with Automation StudioTM. — Shaun Prince

Exceeding Automation Training Requirements with Real-World Simulation

(Montreal, Quebec) October 6th, 2015 
 

We are seeing an increase in demand for qualified technicians particularly within mechatronics and industrial automation. Schools who offer programs in these fields need to invest in large amounts of resources to train their students on the latest technologies used in these industries. Even with dedicated investment, students have difficulties understanding systems’ behaviours as they lack experimentation.

Enhance the Performance of Your Production Lines

(Montreal, Quebec) October 2nd, 2015 
 

Keep your Operations under Control

To maximize their performance, manufacturers need to implement on an ongoing basis continuous improvement processes (CIP), and find ways to reduce waste. Several approaches may be considered. Lean management has been offering for several years an effective approach to optimize the planning of the logistic flow by reviewing the sequencing and time management of activities.

Centralize the Alarms

(Montreal, Quebec) October 1st, 2015 
 

Managing efficiently Critical Situations

From energy performance, service maintenance, flexibility on changes to finding comforting solutions for occupants, these are just a few of the growing requirements of management activities for industrial and commercial buildings. As a result, needs in building automation have increased, leading to a significant transformation of these activities by creating a centralized control for all buildings, aptly called the Building Management System platform (BMS).

Even so, the various groups of equipment are controlled by different software applications specific to each manufacturer and to each technology. These software applications are generally not compatible with each other, even though the mechanical and electrical infrastructures are increasingly interdependent.

Fast Training Development, Accurate System Design

(Toronto, NSW Australia) October 15, 2015 

Background

APT specialization is in providing custom hydraulic courses for its customers who are primarily in the mining sector. And, for over 10 years, APT Specialist Hydraulics & Training has been providing Hydraulic Training and Engineering services in Australia. Key services include System Design, System Analysis & Validation and Training.

Our First Contest! Students use Automation Studio™ Software Solution in a National Competition

(Bogota, Colombia) September 10, 2015 
 

Famic Technologies Inc., the renowned developer of Automation StudioTM, the all-in-one software solution for system design and simulation, and its authorized distributor for Colombia, Casyber LTDA, launched the first 'National Competition for automation with integrated technologies' using Automation StudioTM in cooperation with Francisco José de Caldas University and the Canadian Embassy, on September 10, 2015 in Bogota, Colombia.

Zhejiang Yalong Educational Equipment Joint-Stock Co. Ltd partners with Famic Technologies Inc. to bring Automation Studio™ to several regions in China

(Montreal, Quebec) February 13th, 2015 
 

Famic Technologies Inc., creator of Automation StudioTM, has recently announced that they have found yet another business partner in the likes of Chinese educational equipment manufacturers, Zhejiang Yalong Educational Equipment Joint-stock Co. Ltd. "Yalong" headquartered at Wenzhou, China, has now become the authorized reseller of Automation StudioTM products in Southern China. This new partnership along with the partnership already in place with K&H in Northern China, allows Automation StudioTM promotion in the whole Chinese territory.

Famic Technologies Inc. Delivers the "New" Automation Studio™ With Improved Features & Enhanced Performance

(Montreal, Quebec) March 25th, 2014 
 

Famic Technologies Inc., today announced an array of new feature innovations and enhanced design and functionalities unmatched in the simulation solution software industry for teaching and training all project/machine technologies including hydraulics, pneumatics, electrical systems and HMI. Automation StudioTM, Version 6.1 offers the most complete design and simulation software in the industry today. 

Famic Technologies releases its latest Hydraulic Catalogue v4.0 for Automation Studio™

(Montreal, Quebec) October 24th, 2013 
 

Famic Technologies Inc., recognized the world over for Automation StudioTM, the renowned design and simulation software for fluid power, electrical and automation, announces the release of its latest hydraulic catalogue V4.0. This catalogue offers a superior list of components currently in-demand from its broader Automation StudioTM mobile and industrial hydraulic users' community for quick systems design, simulation and integration tasks in Automation StudioTM P6. 

Famic Technologies Showcases its CAD and Simulation Software at ISARC 2013 in Montreal

Famic Technologies Inc., is exhibiting at the 30th International Symposium on Automation and Robotics in Construction and Mining (ISARC 2013) in Montreal, August 11-13. Visit BOOTH #1023 for personalized demonstrations of Industrial IT Services, Automation StudioTM and Andon StudioTM.

Famic Technologies Inc., leader in software engineering and industrial automation, is proud to showcase its CAD and simulation software at ISARC 2013 (International Symposium on Automation and Robotics) in Montreal from August 11-13. Visit BOOTH #1023 for personalized demonstrations.

New Software Generation for Greener Energy Efficient Mechatronic System Design & Analysis

(Montreal, Quebec) June 21st, 2013 - White Paper published for the KSFC (Korean Society for Fluid Power and Construction Equipment) 

In the world of simulation software, many different approaches are used to obtain accurate hydraulic circuit simulation. Most of these tools model components as a set of mathematical equations parameterized with mechanical and geometric data for each component. They are able to simulate in depth specific functions of a circuit, however it becomes progressively a more demanding task to simulate more complex and complete systems. 

Famic Technologies Presents Automation Studio™ at the Offshore Technology Conference

Famic Technologies Inc. creator of Automation StudioTM, software engineering and industrial automation specialist, is presenting its latest all-in-one design and simulation software solution, Automation StudioTM, at the Offshore Technology Conference (OTC) from May 6th to 9th in Houston, Texas. Live and interactive presentations of Automation StudioTM will demonstrate how it improves efficiency and significantly reduces downtime for bottom line results in the Offshore & Marine and Oil & Gas industries.

Famic Technologies Inc. Expands Its Reach in South Korea, Signs Distributor Agreement with Software Provider, INROOT Corp.

(Montreal, Quebec) January 21th, 2013 

Famic Technologies Inc. creator of Automation StudioTM, the renowned computer-aided design (CAD) and simulation software solution for fluid power and electrical systems, announced today it has signed a distribution agreement with INROOT Corporation, a leading engineering software solution provider in South Korea. As an authorized distributor, INROOT will provide customer service and first level technical support throughout South Korea for Automation StudioTM P6 Professional Edition, Famic Technologies' flagship product.

Famic Technologies and Linde Hydraulics Collaborate to Produce Linde Pumps and Motors Catalogue for Automation Studio™ P6

(Montreal, Quebec) November 19th, 2012 

Famic Technologies Inc. creator of Automation StudioTM, the renowned design and simulation CAD software for fluid power, electrical and automation, is proud to announce its collaboration with Linde Hydraulics, a leading manufacturer of heavy-duty hydraulic drive technology, to release one of the most advanced manufacturer's catalogues available in Automation StudioTM P6.

Andon Studio™, a Powerful New Request Management Software Solution to Optimize Industrial Processes

(Montreal, Quebec) October 2nd, 2012 
 

Known for creating innovative engineering software solutions, Famic Technologies Inc. is pleased to introduce Andon StudioTM , a powerful new request management solution that optimizes industrial processes. Initially designed to support effective response procedures in the manufacturing industry, Andon Studio software easily adapts to all factory and plant operations. It facilitates the sending and monitoring of service requests using the latest advances in communication technology.

Famic Technologies Inc. Opens an Office in Germany

(Montreal, Quebec) June 4th, 2012 
 

Famic Technologies Inc. creator of the renowned Automation StudioTM design and simulation software for hydraulics, pneumatics, electrical and automation systems, is very pleased to announce the expansion of its operations with the opening of an office in Germany. The new office is located in Munich, ideally positioned to provide better support and sales in Europe, primarily in German speaking countries. 

Comatrol launches EasyValve™ 2.0, its hydraulic manifold design software, and a new valve catalogue for Automation Studio™, both developed by Famic Technologies Inc.

(Montreal, Quebec) March 22nd, 2011 
 

Comatrol of Easley, South Carolina, a member of the Sauer-Danfoss Group that engineers, manufactures and supplies screw-in cartridge valves and Hydraulic Integrated Circuits (HICs), announced today that it has collaborated with Famic Technologies to make two main products available: (1) the second version of its hydraulic manifold circuit design software, EasyValveTM, and (2) a first version of its valve catalogue for Automation StudioTM, an innovative design and simulation software developed by Famic Technologies Inc. of Montreal, Quebec.