Cải thiện kỹ năng Automation StudioTM của bạn

Famic cung cấp các khóa đào tạo cho người dùng mới và lâu năm của Automation StudioTM để giúp mở rộng kiến thức của họ về các công nghệ và tính năng khác nhau của phần mềm. Tham gia vào một khóa đào tạo nhóm được cung cấp tại văn phòng Montreal của chúng tôi và các trung tâm khác trên toàn cầu hoặc yêu cầu một khóa đào tạo cá nhân để đề cập đến các chủ đề cụ thể. Người hướng dẫn của chúng tôi cũng có thể gặp bạn trực tuyến hoặc đi đến các cơ sở của bạn.


Khóa đào tạo nhóm sắp tới

Hãy đăng ký một trong các lớp đào tạo của chúng tôi và có được trải nghiệm thực tế với khóa đào tạo kéo dài 3 hoặc 5 ngày, tìm hiểu về Automation Studio™ trong lớp từ 5 đến 10 người. Các buổi đào tạo tiêu chuẩn của Automation Studio™ đã được thiết kế để cung cấp cho bạn cái nhìn tổng quan về các chức năng, thư viện và mô-đun cơ bản của Automation Studio™.

Hydraulic Manifold Training
Automation Studio™ Professional Edition

Ngôn ngữ
English
Thời lượng
7.5 hours
Địa điểm
Online With Instructor

Điều kiện tiên quyết
Hydraulic Module


Mục tiêu
To provide fundamental knowledge and skills required to design, validate, simulate and document hydraulic manifolds in Automation Studio™.


 ▪ Getting accustomed to the user interface.
 ▪ Managing Project Structure.
 ▪ Choosing document standards.
 ▪ Drafting and designing a circuit from hydraulic component Library and manufacturers products.
 ▪ Adjusting component data settings and performance.
 ▪ Sizing components.
 ▪ Building mechanisms.
 ▪ Sequencing a hydraulic circuit.
 ▪ Setting the simulation environment.
 ▪ Analysing system behaviour using Simulation Tools.
 ▪ Troubleshooting systems: failure modes, effects and consequences.
 ▪ Updating project documentation: Bill of Materials (BOM), displayed component information, reports, revision and title blocks.
 
Logo Training

Throughout the training, the trainer will cover all the training material using this synopsis. After each session, participants will be able to individually practice the concepts covered using the instructions and exercises contained in the training guide.From the second session onwards, a short period of time will be allocated at the beginning of each session to answer participants' questions and briefly review the content of the previous session.An additional 30 minutes of practice time will be allocated during each session (3 hours total) where attendees can share their screens with the trainer and have some hands-on with the software and interactive help. 

Buổi học Nội dung yêu cầu
Session 1 (2.5h) 

Getting started

  • Interface/Help/Support
  • 1st Circuit (with components & Products)

Circuit Editor Best Practices

  • Links Features 
  • Grid/Snap (Overview)
  • Display/Layout/Order Features (Overview)
  • Layer Manager (Overview)
  • Groups and Assemblies
  • Diagnostics (Overview)

Component Common Features

  • Property Dialog/Parameters/ Graphical Data

Main Component Parameter Overview

  • Line
  • Pumps
  • Tank
  • Actuators
  • Pressure/Flow/Directional Valves

Simulation Environment

  • Ambient Conditions
  • Simulation Options

Circuit Control

  • Control Elements
  • Electrical Control (Overview)

Analysis Tools

  • Plotters
  • Dynamic Measuring Instruments
Session 2 (2.5h) 

Manifold circuit design

  • Automation Studio™ Manifold Elements Catalogue
  • Component interface (Part Number, Cavities, 3D)

3D Manifold block design (Interfaces/Features/Options/Design)

  • Automatic mode
  • Manual mode

Manifold block edition features (Drawing Documents)

  • Technical drawing
  • Production drawing
Session 3 (2.5h)

Manifold block simulation

  • Simulation

Report

Export

User-Defined Elements

  • Custom Cavity Creation
  • Custom Components
  • Price List
  • Drill Set
Famic Technologies.
www.famictech.com
Logo Famic

Đào tạo tùy chỉnh tại chỗ

Chúng tôi sẽ cung cấp khóa đào tạo thực hành từ 3 đến 5 ngày tại cơ sở của bạn với các bài tập được lựa chọn cẩn thận phù hợp với các ứng dụng cụ thể của bạn. Huấn luyện viên sẽ tận tâm trả lời các câu hỏi của bạn về các tính năng của Automation Studio™.

Yêu cầu đào tạo


Đào tạo trực tuyến

Nhanh chóng và dễ dàng! Các buổi đào tạo trực tuyến và trình diễn trực tiếp là một giải pháp thuận tiện và tiết kiệm chi phí cho những người muốn được đào tạo cá nhân hóa trong sự thoải mái tại văn phòng của chính họ. Các chủ đề và thời lượng của (các) buổi đào tạo trực tuyến sẽ dựa trên nhu cầu của bạn.

Yêu cầu đào tạo


Tư vấn

Hưởng lợi từ chuyên môn của chúng tôi! Chúng tôi có thể triển khai các danh mục thành phần của bạn vào Automation Studio™ và điều chỉnh phần mềm của chúng tôi để đáp ứng các nhu cầu cụ thể của bạn và cải thiện khả năng hoàn thành sản phẩm/dự án của nhóm bạn một cách kịp thời.

Yêu cầu chi tiết