Cải thiện kỹ năng Automation StudioTM của bạn

Famic cung cấp các khóa đào tạo cho người dùng mới và lâu năm của Automation StudioTM để giúp mở rộng kiến thức của họ về các công nghệ và tính năng khác nhau của phần mềm. Tham gia vào một khóa đào tạo nhóm được cung cấp tại văn phòng Montreal của chúng tôi và các trung tâm khác trên toàn cầu hoặc yêu cầu một khóa đào tạo cá nhân để đề cập đến các chủ đề cụ thể. Người hướng dẫn của chúng tôi cũng có thể gặp bạn trực tuyến hoặc đi đến các cơ sở của bạn.


Khóa đào tạo nhóm sắp tới

Hãy đăng ký một trong các lớp đào tạo của chúng tôi và có được trải nghiệm thực tế với khóa đào tạo kéo dài 3 hoặc 5 ngày, tìm hiểu về Automation Studio™ trong lớp từ 5 đến 10 người. Các buổi đào tạo tiêu chuẩn của Automation Studio™ đã được thiết kế để cung cấp cho bạn cái nhìn tổng quan về các chức năng, thư viện và mô-đun cơ bản của Automation Studio™.

Hydraulic Modeling Training
Automation Studio™ Professional Edition

Ngôn ngữ
English
Thời lượng
15 hours
Địa điểm
Online With Instructor

Điều kiện tiên quyết
Completed Automation Studio™ Training: Fundamentals - Hydraulics


Mục tiêu
To provide advanced knowledge and skills required to model hydraulic components and manufacturer products for hydraulic systems.


 ▪ Master the simulation analysis tools.
 ▪ Understand the modeling of hydraulic fluids & lines.
 ▪ Understand complementary component models.
 ▪ Understand the compensation strategies.
 ▪ Carry out modeling of manufacturing products (pumps, compensation valves, etc.).
 ▪ Model and reuse more complex mechanisms.
 ▪ Combine worksheets for system sizing.
 
Logo Training

Throughout the training, the trainer will cover all the training material using the guide provided to you beforehand. After each session, participants will be able to individually practice the concepts covered using the instructions and exercises contained in the training guide.From the second session onwards, a short period of time will be allocated at the beginning of each session to answer participants' questions and briefly review the content of the previous session.The last session will allow the practice and acquisition of knowledge relating to the design of a system and its technical documentation through an application project. In addition, a period of time will be set aside during the last session to review the training material and answer specific questions from the participants

Buổi học Nội dung yêu cầu
Session 1: (2.5h) 

Fundamental notions Recap

  • Circuit and Installation
  • Simulation Options
  • Fluid/Line Configuration
  • Recap on Project Template for Test Bench Use (Part A)

Simulation and Validation Tools

  • Energy and Power Dynamic Instruments
  • Other Plotters 
  • Detect Open Fluid Path in a Circuit
  • Create Initial Conditions
  • Steady State Option
Session 2: (2.5h) 

Fluid Modeling

  • Kinematic Viscosity 
  • Reynolds
  • Specific Mass
  • Compressibility
  • Cavitation 
Session 3: (2.5h)

Understand Component Models 

  • Heater/Cooler/Heat Exchanger
  • Accumulator
  • Directional Valves (Part B)
  • Tanks
  • Spool Position builder
  • Mechanical Components
Session 4: (2.5h) 

Manufacturer Products Modeling (1/2)

  • Pressure Compensation Strategies
  • Model a Restrictive Pressure Compensator
  • Model a Bypass Pressure Compensator (OPTIONAL)
  • Model a Precompensated Valve
  • Model a Postcompensated Valve
  • One among:
    • Model an Open Loop PCLS Pump
    • Close Loop Pump with Displacement Control
    • Control the Torque of a Pump 
Session 5: (2.5h) 

Manufacturer Products Modeling (2/2)

  • One among:
    •  Model a Fix Displacement Travel Motor
    • Model a Negative Displacement Control Hydraulic Motor
  • Model a Hydraulic Steering Unit with Orbitrol (Optional)
Session 6: (2.5h)

Mechanical Modeling (Part B)

  • Component Information
  • BOM and Reports (Main Features)

Component Sizing (Part B)

  • Create a Sizing Sheet
  • Link Parameter between two Sizing Sheets (Overview)
Famic Technologies.
www.famictech.com
Logo Famic

Đào tạo tùy chỉnh tại chỗ

Chúng tôi sẽ cung cấp khóa đào tạo thực hành từ 3 đến 5 ngày tại cơ sở của bạn với các bài tập được lựa chọn cẩn thận phù hợp với các ứng dụng cụ thể của bạn. Huấn luyện viên sẽ tận tâm trả lời các câu hỏi của bạn về các tính năng của Automation Studio™.

Yêu cầu đào tạo


Đào tạo trực tuyến

Nhanh chóng và dễ dàng! Các buổi đào tạo trực tuyến và trình diễn trực tiếp là một giải pháp thuận tiện và tiết kiệm chi phí cho những người muốn được đào tạo cá nhân hóa trong sự thoải mái tại văn phòng của chính họ. Các chủ đề và thời lượng của (các) buổi đào tạo trực tuyến sẽ dựa trên nhu cầu của bạn.

Yêu cầu đào tạo


Tư vấn

Hưởng lợi từ chuyên môn của chúng tôi! Chúng tôi có thể triển khai các danh mục thành phần của bạn vào Automation Studio™ và điều chỉnh phần mềm của chúng tôi để đáp ứng các nhu cầu cụ thể của bạn và cải thiện khả năng hoàn thành sản phẩm/dự án của nhóm bạn một cách kịp thời.

Yêu cầu chi tiết