Announcement

Collapse
No announcement yet.

Terminal Strips

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Terminal Strips

    How do I display wires on both sides of a terminal strip picture?
    Last edited by JoeS; 2 April 2012, 12:00. Reason: Typo

  • #2
    A terminal strip is considered as the boundary between components that are located inside an electrical cabinet and components located outside the cabinet. The components showing on the "FROM" side are "Internal" to the cabinet, while the ones showing on the "TO" side are "External".

    In order to set a component as "Internal" or "External", right-click on it and select "Internal" or "External". This will automatically place it and the wires connecting it on the corresponding side on the terminal strip picture.

    Topic.jpg

    Note that "External" components are displayed in a different color to make it easy to spot on the schematic. This color can be modified in the Electrotechnical Standard.
    Last edited by JoeS; 4 April 2012, 12:28.

    Comment

    Working...
    X